BMB KSP-100 Owner's Manual download pdf (Page 7)

Panel Descriptions

Rear Panel

Speakers

87 9

Power Amplier

TV Monitors

Remote Control Satellite

AC Adaptor

To Outlet

Place the AC adaptor so the side with the

indicator (see illustration) faces upwards

and the side with textual information faces

downwards.

The indicator will light when you plug the AC

adaptor into an AC outlet.

KARAOKE Player

BGM / BGV Player

DVD Player

AUDIO OUTPUT (FRONT-L, FRONT-R,

SUR-L, SUR-R, CENTER, SUBWOOFER)

connectors

Accept connection of a commercially available power amplier. This provides

5.1-channel audio output.

* This instrument is equipped with balanced (XLR) type connectors. Wiring

diagram for these jacks are shown at right. Make connections after rst

checking the wiring diagrams of other equipment you intend to connect.

AUDIO INPUT (KARAOKE, AUX 1, AUX 2)

jacks

Accept connection of the audio output plugs from external devices (such as a KARAOKE player or DVD player).

By setting the AUX1 Input Type or AUX2 Input Type parameter (p. 17) to “MIC,” you can use the AUX 1 or AUX 2 jack as

a mic input.

VIDEO INPUT (KARAOKE, AUX 1, AUX 2)

jacks

Accept connection of the video output plugs from external devices (such as a KARAOKE player or DVD player).

VIDEO OUTPUT (1–3) jacks

Accept connection of TV monitors. Video selected in “INPUT SELECT” (p. 9) appears on the monitor. The same video

is output from these three jacks.

CONTROL connector Accept connection of the KARAOKE player. This allows you to control KSP-100 from the KARAOKE player.

EXT. R SENSOR connector

Accept connection of the Remote Control Satellite. This is used when the KSP-100’s IR (Infrared Receiver) cannot be

used (for example when it is too far away).

DC IN jack Connect the supplied AC adaptor here.

Cord hook

Hook the AC adaptor’s power cord here.

* To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and

to avoid applying undue stress to the DC IN jack, anchor the power cord using the cord hook, as shown in the

illustration.

Ground terminal Connect this to ground (p. 4).

To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Comments to this Manuals

No comments

BMB KSP-100 Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Karaoke systems BMB KSP-100